• <optgroup id="ceauc"></optgroup>
  • <sup id="ceauc"><s id="ceauc"></s></sup><nav id="ceauc"><strong id="ceauc"></strong></nav>
  • <bdo id="ceauc"><button id="ceauc"></button></bdo><samp id="ceauc"></samp>
    <input id="ceauc"></input>
  • <input id="ceauc"><sup id="ceauc"></sup></input>
  •  板牙工具 Threading Tool                                                                               

    • Threading Tool can be threaded manual making L.H. screw , is an essential tool for high pressure Tubing.

    板牙工具可手動制作鋼管的左旋螺紋,是超高壓管件加工的必備工具。

    • Design of the guide sleeve , ensure the concccentricity of processing.

    設計有導向套,保證了加工的同心度。

                                                         TT6板牙工具

    型號說明 Model description

    板牙操作說明 Threading operation instruction

    • Claming fixed block of coning tool(horizontal or vertical installation).

    把CT工具上的固定塊固定(水平或者垂直安裝)。

    • Loosen the tighten gland nut , and remove the handle together.

    把旋轉螺母松開和手柄一起拿掉。

    • The pipe cone inserts into the chuck outward , and lock the gland(As shown in the following figure).

    松開螺母,把鋼管錐面朝外插進夾頭里面鎖緊螺母(如下圖所示)。

    • In the observation hole drops into the cutting oil , to maintain lubricating on blade teeth.

    在板牙工具上的觀察孔上滴進切削油,使牙刃上保持潤滑。

    • Hold the handle with both hands , the threading hole pressing to trap the cone end , in a counter clockwise rotating forcibly tools , turn back after each turn 1~2 rounds , chip cutting discharge , then turned into , according to the required length of the left-hand thread cutting out , finally inversion tools completely out.

    雙手握住手柄,把板牙孔壓緊套住管錐端,逆時針用力轉動工具, 每轉動1~2轉就要退轉,使切削屑排出,再進轉,根據所需長度把左旋螺紋切削出來,最后反轉工具完全退出,板牙完成。

     板牙和錐面尺寸 Threading Size and Cone                                                        

     倒內圓錐工具 Reseating Tool                                                                         

    • Reseationg tools is used to repair old or damaged valve or equipment connector.

    倒內圓錐工具用于維修舊的或是損壞的閥門或是連接件的內孔。

     彎管器 Bending Tool                                                                                     

    • Applicable to high pressure steel pipe , outer diameter 1/4" , 3/8" , 9/16".

    適用于高壓鋼管外徑1/4"、3/8"、9/16"。



     
    QQ在線咨詢
    咨詢熱線
    0755-27967260
    銷售熱線
    18688799549
    丰满少妇高潮惨叫正在播放_久久精品国产最新地址_av激情亚洲男人的天堂国语_语文老师扒开丝袜让我啪